MicroCoil Heaters - Mini Coil Heaters

Mini Coil Heaters

Mini Coil Heater is manufactured in Two Standard Round Diameters of 1.5mm and 1.8mm. The Mini Coil Heater is swaged and compacted to these diameters and fitted into special clamps to tighten over circular parts for heating purpose. Sheath material available is Chrome Nickel Steel. The Flat diameter of 1.3 mm x 2.3 mm can also be made which is tightly coiled on a heat-conducting precision tube and encapsulated and thermically insulated by an outer lathing part.

The Mini Coil Heater clamping styles is designed to save hours of downtime in moulds. The Mini Coil Heater is equipped with special cover for easy fitment over circular parts.

Applications

Blow Moulding Machine
Extrusion Machine
Hot Runner System
Injection Molding Machine
Thermoforming Machine

Standard Cross Sections

	-	1.5 mm	1.8 mm
▅	1.3 mm X 2.3 mm	-	-

Standard Sizes

ID in MM	OD in MM	Length in MM	Wattage W	Voltage V	Lead Length	Unheated Length
19.05	23.5	30.5	268	240	1000mm	5" or 7"
22.2	26.6	30.5	268	240	1000mm	5" or 7"

Technical Specification

Cross Section	1.5mm , 1.8mm , 1.3 mm x 2.3 mm
Sheath Material	Chrome Nickel Steel
Insulation Material	High purity MgO
Heating Element	NiCr 80:20
Lead Wires	Teflon Insulated
Voltage Range	Maximum 250 volts, standard 230 volts
Power Rating	Depending on application
Power Tolerance	± 10% (Tighter Tolerance available)
H. V Testing	800 VΩ
Insulation Resistance	≥ 10 MΩ @ 500V DC (special on request)
Current Leakage	< 0.5 mA @ 253 V AC
Length Tolerance	± 2%
Unheated Length	Minimum 25 mm plus adapter connection.
Minimum Bending diameter	6mm

Mini Coil Heaters

Applications

Standard Cross Sections

Standard Sizes

Technical Specification

Thanks, your enquiry has been sent ...